The choice of lighting for the bathroom - which is better
Lighting the room with which we start our day should please us from the first second. The bathroom is the citadel of our beauty. The light in the bathroom should not be annoying. The ideal combination would be a warm flood white light with a bluish tinge of spotlights for morning toilet items. Waterproof unique light sources will not only please with their characteristics, but will also contribute to the creation of modern design. We will talk about this and much more below.
Lighting must be safe
The bathroom differs from others in the high humidity that steam leaves behind. Lighting in the bathroom should be done with special care. You can use any lamps, but most importantly - waterproof, having protection class IP44 and above, which are not afraid of even a direct hit of water drops.
Wiring should be laid inside the walls in a plastic sheath (corrugation), and junction boxes should be hermetically sealed. All wire joints must be soldered and securely insulated, this approach will protect against short circuits as much as possible.
Advice: if you do not know how to solder twists, you can use a sealed coupler to connect the wires.
Divide lighting into zones
It should be noted that the lighting should be divided into zones. The main lighting can be done with fluorescent or LED lamps, it is advisable not to use very bright devices. Divide the room with contrasting light - this will add uniqueness and favorably affect the perception.
Lighting in the shower is best done with low-voltage light sources, LED lamps are perfect. Illumination in the area of the washbasin and mirror - with spotlights or wall sconces. With this positioning, you will achieve optimal and comfortable lighting.
Number of fixtures and their location
Number of elements and location of fixtures in the bathroom depends on the size of the room and interior design. For example, for a small room, it is enough to install one suspended ceiling and a couple of wall lamps near the mirror.
Large rooms allow you not to focus on ceiling lights. False ceilings and a voltage regulator with spotlights can create a wonderfully intimate atmosphere for an evening bath.
Spotlights are placed in the ratio one unit per square meter area of the room. LED Strip Light will help to give a laconic outline to your furniture and emphasize the uniqueness of the stretch ceiling.
Lighting fixtures create atmosphere, so experiment and add as many light sources as possible. The main thing is to observe the correct connection and the requirements for protection against moisture.
Recommended for viewing.
Choice of light sources
Electronics has a protection class. Lighting fixtures are no exception. For the bathroom, the recommended protection is IP44 and above. Before buying, read the table, it will help you understand what kind of lighting equipment you will be dealing with.
| Degree of protection IP | Liquid | IP_0 | IP 1 | IP_2 | IP_3 | IP_4 | IP_5 | 1Р_6 | 1Р_7 | 1Р_8 |
| Objects and dust | without protection | drip protection vertically falling | protection against drops falling at an angle up to 15° | protection against drops falling at an angle up to 60° | protection against drops falling from all sides | pressure splash protection from all sides | protection against powerful water jets from all sides | protection against immersion for a short time, depth no more than 1 m | protection during immersion and for a short time, depth no more than 1 m | |
| IP0_ | without protection | IP00 | ||||||||
| IP1_ | protection against particles over 50 mm | IP10 | IP 11 | IP 12 | ||||||
| IP2_ | protection against particles over 12.5 mm | IP20 | IP 21 | IP 22 | IP 23 | |||||
| IPZ_ | protection against particles over 2.5 mm | IP 30 | IP 31 | IP 32 | IP 33 | IP 34 | ||||
| IP4_ | protection against particles over 1 mm | IP40 | IP 41 | IP 42 | IP 43 | IP44 | ||||
| IP5_ | coarse dust protection | IP 50 | IP 54 | IP 55 | ||||||
| IP6_ | complete dust protection | IP60 | IP65 | IP66 | IP67 | IP68 |
Protection from moisture, as a rule, is a special design of the housing of the lighting device. It includes seals that provide a tight fit of the body parts to each other. This design does not require disassembly of the lamps when cleaning the room.
When using LED strip, make sure the degree of protection, it should be maximum. As a rule, the LED strip is often mounted due to its sticky base. The protection class is recommended to apply higher. In this case, IP68 is perfect.
Varieties of waterproof lamps
All lamps differ in design and type of installation. Consider the main options for lighting in the bathroom - this will help you navigate when planning the interior of the bathroom. Types of lamps:
- Point lamps - there are mortise and overhead. Place of installation suspended plastic and stretch ceilings. Wall spotlights are installed on the walls; unlike their predecessors, they have a body. It is important to pay attention that it is waterproof.
![The choice of lighting for the bathroom - which is better]()
Spotlights come in different designs. - Ceiling - there are different designs (chandeliers, disks, boxes), but their essence is in hanging or overhead mounting to the ceiling. They also have a protection class.
- wall - an analogue of point wall-mounted devices, only fluorescent or LED lamps act as a light source. The light is scattered.
![In the bathroom, sconces must be resistant to splashing water.]()
In the bathroom, sconces must be resistant to splashing water. - floor standing - are used to illuminate the floor, have protection not only from moisture, but also from shock.
- Track are popular today. The design is based on a bar on which two or more lamps are located. Plafonds of such lamps are movable. Often installed near mirrors.
![track lights]()
Track lights allow you to direct the flow of light to the right place with a slight movement of the hand. Lamps and spotlights are used as light sources. Mounted on a movable bracket. - Decorative lighting is a low power device, as well as an LED strip. Apply to your taste and create a warm shade of light.
Optimal bathroom lighting
Lighting will be optimal, which creates comfortable conditions for performing procedures. In this case, it is up to you to decide how to arrange the room better, and we will give some useful tips on the location of the lamps in the bathroom.
Create hidden furniture lighting and cabinets, it will give your furniture an unusual floating effect, emphasize its contours and fill the room with pleasant radiation. Such lighting is perfect not only for furniture, but also for the ceiling.
The original solution is floor lighting. There are several ways to do this:
- Install it in the plinth.
- Install spotlights.
Choose the installation method yourself, you must imagine what kind of effect you want to get from the backlight. The LED strip will do the job evenly.
Use spotlights to highlight individual elements. Connect all lights to individual switches. For example, in the evening, an atmosphere of relaxation can be created by illuminating the bath with spotlights and the floor. LED plinth. Such solutions will create a distinct effect of twilight and spot lighting.
Do not focus on ceiling lighting, it is recommended to install as many different light sources as possible. To illuminate the ceiling, use LED strips, the light from them will give additional lighting to the room.
Helpful Hints
Use as many light sources as possible. For example, if the switches are located deep in the room, you can use floor lighting with skirting boards with a motion sensor, it will illuminate your path to the rest of the light switches.
Illuminate mirrors along the contour, in this way you will add volume to the room. And take the light near the mirror for your procedures from track lights, thanks to them you can direct the light to the right place, they are well suited if your family is not all the same height.
Video lesson: Which ceiling is better to make in the bathroom.
For lighting safety, securely isolate all connection points and use luminaires with the appropriate moisture protection class. Make the connection points of the wires with a moisture-proof coupling, it will ensure reliable contact.
